Tension levers for rotary lever clamps

go back

Products
- Product overview
  - Flexible standard component system
    - Clamp straps Clamping devices
      - Side clamp
        Tension levers for rotary lever clamps

Item description/product images

DescriptionProduct description:The tension lever can be used for the hydraulic rotary lever clamp 04624-20 or the pneumatic rotary lever clamp 04624-19. The "standard" tension lever or the "blank" tension lever can be selected. The "standard" tension lever is finish machined and can be mounted directly. The "blank" tension lever can be individually machined to suit. The blank lever is made from unhardened steel for easier machining. After the individual contour has been machined, the tension levers must be annealed and hardened before mounting to prevent deformation of the levers during use. Material:Standard and blank steel.Version:Standard hardened.
Blank not hardened.Note:By positioning the rotary lever clamp correctly, workpiece tolerances can be optimally compensated for despite the short clamping lever.

The clamping elements must be checked regularly for dirt and cleaned if necessary.
The effective clamping force must be calculated for every tension lever.
The optimum tension lever position is 90°.
The following hardness grade must be achieved before a "blank" tension lever is used: Hardened depth 0.3 + 0.2 HRC 50 +/- 2.

Follow safety instruction.Assembly:The tension lever is attached to the piston of the rotary lever clamp and secured with a dowel pin. The tension lever is thus axially secured and secured against rotation.On request:Other sizes and types.Drawing reference:

Form A: Standard
Form B: Blank

Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 04624-30 Tension levers for rotary lever clamps

386 kB

Drawings (total overview)

Tension levers for rotary lever clamps, Form A standard

More information

Drawings

Tension levers for rotary lever clamps, Form A standard

Item selection/filter

Order No.	Form	Form-Type	For piston Ø	travel	B	H	L	R
04624-30-12091	A	standard	12	0,98	12	6	9	1,5
04624-30-12131	A	standard	12	1,12	12	6	13,5	1,5
04624-30-12181	A	standard	12	1,97	12	6	18	1,5
04624-30-12221	A	standard	12	2,45	12	6	22,5	1,5
04624-30-16121	A	standard	16	0,78	16	8	12	2
04624-30-16181	A	standard	16	1,16	16	8	18	2
04624-30-16241	A	standard	16	1,6	16	8	24	2
04624-30-16301	A	standard	16	1,94	16	8	30	2
04624-30-20151	A	standard	20	1,48	20	10	15	2,5
04624-30-20221	A	standard	20	2,21	20	10	22,5	2,5
04624-30-20301	A	standard	20	2,95	20	10	30	2,5
04624-30-20371	A	standard	20	3,68	20	10	37,5	2,5
04624-30-25191	A	standard	25	1,26	25	12,5	19	3
04624-30-25281	A	standard	25	1,86	25	12,5	28	3
04624-30-25381	A	standard	25	2,52	25	12,5	38	3
04624-30-25471	A	standard	25	3,12	25	12,5	47	3
04624-30-32241	A	standard	32	2,56	32	16	24	4
04624-30-32361	A	standard	32	3,85	32	16	36	4
04624-30-32481	A	standard	32	5,13	32	16	48	4
04624-30-32601	A	standard	32	6,4	32	16	60	4
04624-30-40301	A	standard	40	3,05	40	20	30	5
04624-30-40451	A	standard	40	4,6	40	20	45	5
04624-30-40601	A	standard	40	6,1	40	20	60	5
04624-30-40751	A	standard	40	7,6	40	20	75	5

Tension levers for rotary lever clamps, Form B blank

More information

Drawings

Tension levers for rotary lever clamps, Form B blank

Item selection/filter

Order No.	Form	Form-Type	For piston Ø	travel	B	H	L	L1
04624-30-12152	B	blank	12	1,64	12	6	15	9
04624-30-12242	B	blank	12	2,62	12	6	24	9
04624-30-16202	B	blank	16	1,29	16	8	20	12
04624-30-16322	B	blank	16	2,07	16	8	32	12
04624-30-20252	B	blank	20	2,45	20	10	25	15
04624-30-20402	B	blank	20	3,92	20	10	40	15
04624-30-25312	B	blank	25	2,1	25	12,5	31	18,8
04624-30-25502	B	blank	25	3,32	25	12,5	50	18,8
04624-30-32402	B	blank	32	4,28	32	16	40	24
04624-30-32642	B	blank	32	6,84	32	16	64	24
04624-30-40502	B	blank	40	5,08	40	20	50	30
04624-30-40802	B	blank	40	8,1	40	20	80	30