norelem uses cookies to optimally design and continually improve the website. By continuing to use this website, you agree to the use of cookies. You can find more information about cookies in our Data protection declaration.okay
Bevel gear drive with plastic bevel gears

Bevel gear drive with plastic bevel gears

go back

Item description/product images

DescriptionMaterial:Version:Housing and shafts, bright.
Bevel gears, injection moulded, straight teeth. Engagement angle 20°.
Polyacetal, white.
Polyketone, ivory-tone.
Note:Polyacetal: Standard material with high hardness grade and low coefficient of friction.
Polyketone: Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties.

Universally applicable and maintenance-free bevel gear drives in six different sizes with the ratio 1:1. The rotation direction is arbitrary. The shafts are mounted in the housing on self-lubricating plain bearings. The axis angle is 90°.

These bevel gears are suitable for manual drives and for temporary power drives at low speeds and with a low load.
Temperature range:-20 °C to +100 °C.Note:The torques specified in the tables relate exclusively to the toothing. The shaft diameter, key size, etc. are not taken into account. The permissible load calculations are based on the basic principles of the pitting load capacity of the tooth flanks as well as the occurring tooth root stress. The respective permissible load of a gear wheel depends on so many different factors that the values specified can only be reference values meant to make selection easier. The torque specifications relate to a single tooth. The overlap, which is essential for determining the transmissible torque, occurs depending on the pitch diameter, gear wheel pairing, etc. In the simplest straight tooth cases, an overlap ratio of 1.1 to 1.25 is normal. To increase the overlap, a higher number of teeth with smaller modules is used. A good profile overlap can minimise damage such as pitting.Special features:
DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.
 Datasheet 22715 Bevel gear drive with plastic bevel gears 144 kB


Bevel gear drive with plastic bevel gears

Item selection/filter

Order No.Component
ModuleNo. of

22715-1210polyacetal1:1116/163219,45h9124,81018,84501568,3 29.58 €
22715-1215polyacetal1:11,516/164528,48h9185,81528,257020929 33.59 €
22715-1220polyacetal1:1216/16553510h62272037,5690301173 38.90 €
22715-1225polyacetal1:12,516/16654112h62592546,871053512,5145 45.10 €
22715-1230polyacetal1:1316/167547,515h63093056,281204015250 51.34 €
22715-1235polyacetal1:13,516/16855418h633113565,791354516440 57.82 €
22715-2210polyketone1:1116/163219,45h9124,81018,84501568,7 34.71 €
22715-2215polyketone1:11,516/164528,48h9185,81528,257020930,4 40.08 €
22715-2220polyketone1:1216/16553510h62272037,5690301176,6 42.83 €
22715-2225polyketone1:12,516/16654112h62592546,871053512,5152,2 48.33 €
22715-2230polyketone1:1316/167547,515h63093056,281204015262,5 54.92 €
22715-2235polyketone1:13,516/16855418h633113565,791354516462 58.35 €
My norelemE-mailPassword
Shopping cart
Number of items: 0
Amount: 0.00 
shopping cart
Quick order / Check availabilityOrder article directly or check availability.display
CallbackDo you have any questions? We will call you back.display
United States
Sitemap Print Recommended Newsletter Top
Copyright © 2020 norelem. All rights reserved. Tel. +49 (0) 71 45/206-44 to 45 · Fax +49 (0) 71 45/206-83