Floating clamp with separate workpiece clamp and interlock
Item description/product images
DescriptionMaterial:Base body and jaws steel. Housing aluminium.Version:Body nitrided, black oxidised and ground. Jaws nitrided and black oxidised. Housing blue anodized.Note:This floating clamp is used to clamp and support overhanging clamping points on thin components. It prevents vibrations and deflection during machining.Type of operation:1. Push the floating clamp down. 2. Pivot the jaws. The lower jaw contacts the workpiece with a light spring force. 3. Tighten the SW 18 hexagon nut. The jaws clamp the workpiece, the clamp is still floating. 4. Tighten the SW 10 hexagon nut. The clamping process is completed. 5. Reverse the process to release.Assembly:Fasten the floating clamp to the fixture with the M12 screw. Adjust the height stop and the swivel range using the blue sleeve and lock with the 3x2.5 mm grub screws. When setting the height leave generous clearance above. For safe operation the M12 tapped hole must always be closed. For specific clamping applications the standard jaws can be altered or replaced.
DownloadHere is all the information as a PDF datasheet: