Item description/product images

Indexing plungers for thin-walled parts Form A
  • Indexing plungers for thin-walled parts Form A
DescriptionMaterial:Steel version:
Indexing pin hardened:
grade 5.8

Stainless steel version:
Indexing pin not hardened
Threaded sleeve 1.4305
Indexing pin 1.4305

Mushroom knob black grey thermoplastic.
Version:Steel version:
Indexing pin hardened, ground, black oxidised.

Stainless steel version:
Indexing pin not hardened, ground, bright.
Note:These indexing plungers are especially well-suited for assembly in thin-walled parts.
Indexing plungers are used where any change in locking position due to lateral forces should be prevented. A new locking position can be set only after the pin has been manually disengaged.
Form C is recommended for applications where the locking pin should remain disengaged for an extended period and be prevented from springing back.
Accessory:A double-ended ring spanner can be supplied as an accessory to tighten the nut.
DownloadHere is all the information as a PDF datasheet:
 Datasheet 03089_A Indexing plungers for thin-walled parts Form A 119 kB


Indexing plungers for thin-walled parts Form A

Item selection/filter

Order No.FormBase
Type DD1D2D3LL1L2L3HSW1SW2F x 30°Spring force
initial pressure
F1 approx. N
Spring force
final pressure
F2 approx. N
Article number
ring spanner
03089-31105ASteelhardened5M10x1281046,511,51310,55-917141,361503089-91416  6.20 €
03089-31206ASteelhardened6M10x1281047,512,51310,56-1017141,871903089-91416  6.82 €
03089-311105AStainless steelnot hardened5M10x1281046,511,51310,55-917141,361503089-91416  10.21 €
03089-311206AStainless steelnot hardened6M10x1281047,512,51310,56-1017141,871903089-91416  11.42 €
Shopping cart
Number of items: 0
Amount: 0.00 
Speed ordering
United States
Sitemap Print Recommended Newsletter Top
Copyright © 2017 norelem. All rights reserved. Tel. +49 (0) 71 45/206-44 to 45 · Fax +49 (0) 71 45/206-83