|
|
42216UNILOCK 5-axis basic module double clamp system size 50 mm |
go back |
|
Item description/product images |
|
|
DescriptionMaterial:Carbon steel.Version:Main body oxidised. Contact faces hardened and ground.Note:The UNIlock 5-axis double clamp basic modules can be adapted directly to machine tables with grid holes or T-slots, as well as grid hole subplates. The narrow design of the basic module enables it to be used on grid spacings from 40 mm.
The following clamping forces are possible with the UNILOCK clamping pin in conjunction with M8, M10 fastening screws: - Clamping force (M8) 15,000 N - Clamping force (M10) 25,000 N Clamping force with DIN EN ISO 4762 -12.9 cap screws
Clamping pins may only be clamped in conjunction with a mounted interchangeable unit in the clamping module.
DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Order No. | D | H | SW | Retraction force kN | Tightening torque max. Nm | CAD | Acc. | Price | Order |
---|
42216-000750 | 50 | 75 | 4 | 10 | 10 | | | 900.45 € | |
Other items in this category |
|
Quick order / Check availabilityOrder article directly or check availability.display |
|