Indexing plungers, stainless steel with stainless steel mushroom...

go back

Products
- Product overview
  - norelem inch
    - Spring plungers Indexing plungers Stops Centring/positioning components Ball lock pins T-slot nuts - inch
      - Indexing plungers - inch
        Indexing plungers, stainless steel with stainless steel mushroom grip - inch
        Indexing plungers, stainless steel with stainless steel mushroom grip. Locking slot and locknut - inch

Item description/product images

DescriptionMaterial:

Indexing pin hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4034.

Indexing pin not hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4305.

Mushroom knob 1.4305, electropolished.

Version:Bright.
Indexing pin ground.Note:Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Form C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
On request:Special versions.

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 03089_D inch Indexing plungers, stainless steel, Form D, inch

176 kB

Drawings

Item selection/filter

Order No.	Form	Main material	locating pin	D	D1	D2	L	L1	L2	L3	Travel S	SW1	SW2	Fx30°	Spring force initial pressure F1 approx. N	Spring force final pressure F2 approx. N
03089-004903AJ	D	stainless steel	hardened	3	1/4-28	14	31,5	12	5	10	3,5	8	7/16	0,8	4,5	10
03089-004004AK	D	stainless steel	hardened	4	5/16-24	18	38,5	15	6	13	4	10	1/2	1	6	12
03089-004105AL	D	stainless steel	hardened	5	3/8-24	21	43,5	17	7	15	5	13	9/16	1,3	4,5	12
03089-004206A5	D	stainless steel	hardened	6	1/2-13	25	52	20	8	17	6	14	3/4	1,8	6	14
03089-004308A6	D	stainless steel	hardened	8	5/8-11	33	68	26	10	23	8	19	15/16	2,3	15	35
03089-004410A7	D	stainless steel	hardened	10	3/4-10	33	74	28	12	25	10	22	1-1/8	2,6	15	34
03089-004412AO	D	stainless steel	hardened	12	3/4-16	33	78	28	14	25	12	22	1-1/8	2,8	15	39
03089-004516A8	D	stainless steel	hardened	16	1-8	40	96	32	18	28	16	27	1-1/2	3,2	20	46
03089-114903AJ	D	stainless steel	not hardened	3	1/4-28	14	31,5	12	5	10	3,5	8	7/16	0,8	4,5	10
03089-114004AK	D	stainless steel	not hardened	4	5/16-24	18	38,5	15	6	13	4	10	1/2	1	6	12
03089-114105AL	D	stainless steel	not hardened	5	3/8-24	21	43,5	17	7	15	5	13	9/16	1,3	4,5	12
03089-114206A5	D	stainless steel	not hardened	6	1/2-13	25	52	20	8	17	6	14	3/4	1,8	6	14
03089-114308A6	D	stainless steel	not hardened	8	5/8-11	33	68	26	10	23	8	19	15/16	2,3	15	35
03089-114410A7	D	stainless steel	not hardened	10	3/4-10	33	74	28	12	25	10	22	1-1/8	2,6	15	34
03089-114412AO	D	stainless steel	not hardened	12	3/4-16	33	78	28	14	25	12	22	1-1/8	2,8	15	39
03089-114516A8	D	stainless steel	not hardened	16	1-8	40	96	32	18	28	16	27	1-1/2	3,2	20	46