Axial angular contact ball bearing, steel double-row, with...

go back

Products
- Product overview
  - Systems and components for machine and plant construction
    - Couplings Rigid couplings Keyless locking couplings Cardan joints Quick-fit couplings Bearings Seals
      - Rolling bearings
        Axial angular contact ball bearing, steel double-row, with flange

Item description/product images

DescriptionMaterial:Steel housing.
Nitrile rubber seal.Version:Ground edges.Note:Preloaded high-accuracy bearings with a 60° thrust angle. The bearings accept both radial and axial forces from both directions. Due to their preload, the angular contact ball bearings provide a high level of stiffness, excellent concentricity, precise tool positioning and repeatability.

The integrated low-friction seal effectively keeps dirt away from the bearing, thereby ensuring excellent operating safety and a long service life.

The bearing friction coefficient Mrl is a reference value.

The moment of inertia corresponds to that of the rotating inner ring.

The limiting speeds are applicable after grease is applied.Technical data:All bearings are supplied ready for mounting with lubricating grease type KE2P-35 acc. to DIN 51825.

Housing and shaft tolerances correspond to roundness tolerance class IT2 and perpendicularity tolerance class IT4.Application:For thread drive bearing.Temperature range:-30 °C to +120 °C.Assembly:Precision slotted nuts must be used for mounting the threaded spindles.

To compensate for any material settling during assembly, tighten the slotted nuts using 2x tightening torque, loosen slightly and then tighten using the prescribed tightening torque.

Tighten fastening screws crosswise up to max. 70% of the yield point.Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 23806-01 Axial angular contact ball bearing, steel double-row, with flange

279 kB

Drawings (total overview)

Axial angular contact ball bearing, steel, double row with flange, Form A

More information

Drawings

Axial angular contact ball bearing, steel, double row with flange, Form A

Item selection/filter

Order No.	Abbreviation	Version 1	Form	B	B1	B2	D	D1	D2	D3	D4	D5	R	R1	α	β	M	Tightening torque, precision locknut Nm	Speed limit rpm	CAD	Acc.	Price	Order
23806-01-101205525	1255-2RS	double-row	A	25 -0,25	3	17	12-0,005	55-0,01	25	-	6,6	42	0,3	0,6	60°	120°	M6	8	3800			225.68 €

Order No.	Abbreviation	Static load rating N	Dynamic load rating N	Axial rigidity N/μm	Tilt rigidity Nm/mrad	Bearing friction torque Nm	Moment of inertia kg.cm²	Circular runout μm	Radial bearing clearance	Hole tolerance μm	OD tolerance μm	Width tolerance μm	CAD	Acc.	Price	Order
23806-01-101205525	1255-2RS	24700	16900	375	50	0,16	0,068	2,0	pre-tensioned	0-5	0-10	0-250			225.68 €

Axial angular contact ball bearing, steel, double row with flange, Form B

More information

Drawings

Axial angular contact ball bearing, steel, double row with flange, Form B

Item selection/filter

Order No.	Abbreviation	Version 1	Form	B	B1	B2	D	D1	D2	D3	D4	D5	R	R1	α	β	M	Tightening torque, precision locknut Nm	Speed limit rpm	CAD	Acc.	Price	Order
23806-01-101506025	1560-2RS	double-row	B	25 -0,25	3	17	15-0,005	60-0,01	28	36	6,6	46	0,3	0,6	60°	60°	M6	10	3500			240.13 €
23806-01-101706225	1762-2RS	double-row	B	25 -0,25	3	17	17-0,005	62-0,01	30	38	6,6	48	0,3	0,6	60°	60°	M6	15	3300			245.55 €

Order No.	Abbreviation	Static load rating N	Dynamic load rating N	Axial rigidity N/μm	Tilt rigidity Nm/mrad	Bearing friction torque Nm	Moment of inertia kg.cm²	Circular runout μm	Radial bearing clearance	Hole tolerance μm	OD tolerance μm	Width tolerance μm	CAD	Acc.	Price	Order
23806-01-101506025	1560-2RS	28000	17900	400	65	0,20	0,102	2,0	pre-tensioned	0-5	0-10	0-250			240.13 €
23806-01-101706225	1762-2RS	31000	18800	450	80	0,24	0,132	2,0	pre-tensioned	0-5	0-10	0-250			245.55 €

Axial angular contact ball bearing steel, double row with flange, Form C

More information

Drawings

Axial angular contact ball bearing steel, double row with flange, Form C

Item selection/filter

Order No.	Abbreviation	Version 1	Form	B	B1	B2	D	D1	D2	D3	D4	D5	R	R1	α	β	M	Tightening torque, precision locknut Nm	Speed limit rpm	Price
23806-01-102006828	2068-2RS	double-row	C	28 -0,25	3	19	20-0,005	68-0,01	34,5	44	6,6	53	0,3	0,6	60°	45°	M6	18	3000	254.06 €
23806-01-102507528	2575-2RS	double-row	C	28 -0,25	3	19	25-0,005	75-0,01	40,5	49	6,6	58	0,3	0,6	60°	45°	M6	25	2600	279.07 €
23806-01-104010034	40100-2RS	double-row	C	34 -0,25	3	25	40-0,005	100-0,01	58	68	8,8	80	0,3	0,6	60°	45°	M6	55	1800	357.75 €

Order No.	Abbreviation	Static load rating N	Dynamic load rating N	Axial rigidity N/μm	Tilt rigidity Nm/mrad	Bearing friction torque Nm	Moment of inertia kg.cm²	Circular runout μm	Radial bearing clearance	Hole tolerance μm	OD tolerance μm	Width tolerance μm	Price
23806-01-102006828	2068-2RS	47000	26000	650	140	0,30	0,273	2,0	pre-tensioned	0-5	0-10	0-250	254.06 €
23806-01-102507528	2575-2RS	55000	27500	750	200	0,40	0,486	2,0	pre-tensioned	0-5	0-10	0-250	279.07 €
23806-01-104010034	40100-2RS	101000	43000	1000	550	0,70	2,260	2,5	pre-tensioned	0-5	0-10	0-250	357.75 €