norelem uses cookies to optimally design and continually improve the website. By continuing to use this website, you agree to the use of cookies. You can find more information about cookies in our Data protection declaration.okay
Indexing plunger, stainless steel with remote actuation
03096-10

Indexing plunger, stainless steel with remote actuation

go back

Item description/product images

Show/filter all items
DescriptionProduct description:Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces.
Some examples of this are for length, height and position locking in machine, furniture and special vehicle construction.

Indexing plungers with remote actuation are used where inaccessible assembly spaces are making it difficult to operate, or where remote actuation is required for ergonomic or safety reasons.

The indexing plunger is connected to the operator side by a Bowden cable. The combination of indexing plunger and actuating element forms a complete system which can be used for many types of application.
As an alternative to the actuating element, the supplied screw nipple (Ø5 x 7 mm) can be used to integrate an individual actuating element into the system.

The Bowden cable is available in various lengths.
To ensure an exact fit in the application concerned, the Bowden cable can be shortened as required when installing.

Corrosion protection is provided by selecting a suitable material for coating application. The wire cable or cable casing can be replaced easily if required.
Material:Indexing plunger and actuating element, stainless steel.
Mushroom grip in thermoplastic.
Wire cable in stainless steel.
Cable casing made of steel wire with inner and outer plastic sheathing.
End sleeves, adjusting screws and screw nipples made of brass.
Version:Indexing pin, hardened, ground and bright.
Bowden cable casing, black.
Mushroom grip, thermoplastic dark grey.
Plastic cover, thermoplastic in black, grey, red or yellow.
Note for ordering:Indexing plungers with remote actuation and actuating element must be ordered separately.Note:When installing the Bowden cables, the following points should be noted:
The length of the free end of the cable can change due to the layout angle, bending radius and load factors. So, after laying the Bowden cable, the length of the counter-bearing (casing) must be adjusted using the adjusting screw supplied. The adjusting screw is also used to set the pretension in the Bowden cable system.
When laying the cable, particular care must be taken to ensure that the bending radius is not below the minimum value, which in this case is R = 65 mm. A radius which is too narrow can lead to increased wear and higher friction.
Also avoid letting the bending radius briefly go below the minimum value when installing, as this can cause damage to the casing. Also, the casing is designed only to support pressure forces. If pulled too sharply, the inner coil will be stretched and permanently damaged.
On request:Special versions.Accessory:Hexagon nuts 07212.
Mounting brackets 03099.
Spacer rings 03089.
Positioning bushes 03099-50.
Actuating element 03096-10-12420.
Supplied withIndexing plunger with remote actuation:
Indexing plunger with preassembled cable, casing, end sleeve, adjusting screw M6 x 34 mm and screw nipple Ø5 x 7 mm.

Actuating element:
Actuating element with plastic cover.
Drawing reference:
1) Indexing plunger
2) Bowden cable casing
3) Bowden cable
4) Adjusting screw
5) Actuating element
6) Screw nipple
7) Cover
DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.
 Datasheet 03096-10 Indexing plunger, stainless steel with remote actuation 261 kB

Drawings (total overview)

Indexing plunger, stainless steel with remote actuation

Indexing plunger, stainless steel with remote operation

More information

Drawings

Indexing plunger, stainless steel with remote operation

Item selection/filter

Order No.D

D1D2D3LL1L2L3Travel
S
SWFx30°Spring force
initial pressure
F1 approx. N
Spring force
final pressure
F2 approx. N
CADAcc.PriceOrder
03096-10-02206X10006M12x1,514510001849106101,8614 33.76 €
03096-10-02206X30006M12x1,514530001849106101,8614 37.32 €
03096-10-02206X50006M12x1,514550001849106101,8614 42.06 €
03096-10-02308X10008M16x1,519510002359108132,31535 36.72 €
03096-10-02308X30008M16x1,519530002359108132,31535 40.27 €
03096-10-02308X50008M16x1,519550002359108132,31535 45.01 €
03096-10-02410X100010M20x1,5235100024651010162,81534 41.46 €
03096-10-02410X300010M20x1,5235300024651010162,81534 45.01 €
03096-10-02410X500010M20x1,5235500024651010162,81534 49.75 €
03096-10-02412X100012M20x1,5235100026651012162,81539 44.42 €
03096-10-02412X300012M20x1,5235300026651012162,81539 47.98 €
03096-10-02412X500012M20x1,5235500026651012162,81539 52.72 €

Actuating elements for Indexing plunger with remote actuation

More information

Drawings

Actuating elements for Indexing plunger with remote actuation

Item selection/filter

Order No.Colour
Cap
Internal thread
D
D1

D2LL1L2L3SW1SW2CADAcc.PriceOrder
03096-10-12420black grey RAL 7021M6M20x1,533732812252230 23.69 €
03096-10-124205light grey RAL 7035M6M20x1,533732812252230 23.69 €
03096-10-124206traffic red RAL 3020M6M20x1,533732812252230 23.69 €
03096-10-124207rape yellow RAL 1021M6M20x1,533732812252230 23.69 €
My norelemE-mailPassword
Shopping cart
Number of items: 0
Amount: 0.00 
shopping cart
Quick order / Check availabilityOrder article directly or check availability.display
CallbackDo you have any questions? We will call you back.display
Poland
Sitemap Print Recommended Newsletter Top
Copyright © 2020 norelem. All rights reserved. Tel. +49 (0) 71 45/206-44 to 45 · Fax +49 (0) 71 45/206-83