Indexing plungers, stainless steel, pneumatic, Form C, double...

go back

Products
- Product overview
  - Flexible standard component system
    - Spring plungers Indexing plungers Stops Centring/positioning components Ball lock pins T-slot nuts
      - Indexing plungers
        Indexing plungers, stainless steel, pneumatic
        Indexing plungers, stainless steel, pneumatic, Form C, double acting

Item description/product images

DescriptionProduct description:Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces.
Some examples of this are for length, height and position indexing in machines, equipment, furniture and special vehicle construction.

Pneumatic indexing plungers are operated by compressed air. This facilitates automatic retraction or extension of the indexing pin.
In addition, the indexing point can be located in an area inaccessible for manual operation.

By the version with status sensor, the actuation status can be detected and evaluated electronically.
For this purpose, the magnetic field sensor is clamped in the slot profile of the sensor holder. The status sensor and sensor holder can be moved axially and secured to suit the desired sensing position.Material:

Threaded sleeve stainless steel 1.4305.
Indexing pin stainless steel 1.4034.
Piston seal and O-rings NBR.
Rod seal TPU.
Magnet NdFeB.
Locknut stainless steel A2-70.

Magnetic field sensor thermoplastic PA12.
Sensor holder POM, slot profile aluminium.

Version:Indexing pin hardened, ground and bright.Type of operation:Form A and B: single-acting with spring return
Form C: double-actingTechnical data:Pneumatic properties:
Operating pressure: 4-6 bar
filtered, dried air, lubricated or unlubricated

Magnetic field sensor:
Output relay: PNP normally open (NO)
Operating voltage: 10 - 30 V DC
Operating current: 200 mA
Switch field strength: 2 kA/m
Switching frequency: 3000 Hz
Short-circuit proof: yes
Reverse polarity protected: no
Rating: IP67
Connection type: 2 m PUR cable
Temperature range: -25 °C - +85 °C
Approvals: CE, c-UL-us, UKCA, WEEEApplication:In automated production plants and fixtures.Temperature range:-30 °C to +80 °CAccessory:Magnetic field sensor 83001.
Sensor holder with T-slot 83010.Drawing reference:

1) Port 1 - pneumatic extension
2) Port 2 - pneumatic retraction
3) With status sensor
P: operating pressure

Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 03095-01_C Indexing plungers, stainless steel, pneumatic, Form C, double acting

185 kB

Drawings

Item selection/filter

Order No.	Form	Version 2	B	D	D1	D2	D3	D4	D5	H	Travel S	L	L1	L2	L3	L4	L5	SW1	SW2	T
03095-01-320610	C	-	-	6	M12x1,5	22	23	M5	-	-	10	77	20	10	18	-	-	24	19	4
03095-01-330815	C	-	-	8	M16x1,5	22	23	M5	-	-	15	80	26	10	18	-	-	24	24	4
03095-01-341015	C	-	-	10	M20x1,5	22	23	M5	-	-	15	80	28	10	18	-	-	24	30	4
03095-01-341215	C	-	-	12	M20x1,5	22	23	M5	-	-	15	80	28	10	18	-	-	24	30	4
03095-01-3206101	C	with status sensor	35	6	M12x1,5	22	23	M5	2,5	19	10	77	20	10	18	23,5	2000	24	19	4
03095-01-3308151	C	with status sensor	35	8	M16x1,5	22	23	M5	2,5	19	15	80	26	10	18	23,5	2000	24	24	4
03095-01-3410151	C	with status sensor	35	10	M20x1,5	22	23	M5	2,5	19	15	80	28	10	18	23,5	2000	24	30	4
03095-01-3412151	C	with status sensor	35	12	M20x1,5	22	23	M5	2,5	19	15	80	28	10	18	23,5	2000	24	30	4

Order No.	Form	P=Operating pressure bar	F6=Piston force at 6 bar (N)	F6=Retraction force at 6 bar (N)
03095-01-320610	C	4-6	113	96
03095-01-330815	C	4-6	113	96
03095-01-341015	C	4-6	113	96
03095-01-341215	C	4-6	113	96
03095-01-3206101	C	4-6	113	96
03095-01-3308151	C	4-6	113	96
03095-01-3410151	C	4-6	113	96
03095-01-3412151	C	4-6	113	96