Item description/product images

Drill bushes push-inDIN 173
  • Drill bushes push-inDIN 173
  • Drill bushes push-inDIN 173
  • Drill bushes push-inDIN 173
DescriptionMaterial:Special steelVersion:Hardened to 780 ±40 HV 10 and ground.
Without lead-in groove.
Note:All bushes have the bore size marked on the upper face, e.g. 10. Diameters D1 over 15 mm increase in size by 0.5 mm.
DownloadHere is all the information as a PDF datasheet:
 Datasheet 08920 Drill bushes push-inDIN 173 426 kB

Drawings

Drill bushes push-inDIN 173

Overview of items (compressed)

Item selection/filter
FormD1D2D3D5ML1L2E1
centre spacing
to flathead screws
RT1T2Filter
A2,5/2,6/2,7/2,8/2,9/3/3,1/3,2/3,3/3,4/3,5/3,6/3,7/3,8/3,9/48162,5410101530,020,005
A4,1/4,2/4,3/4,4/4,5/4,6/4,7/4,8/4,9/5/5,1/5,2/5,3/5,4/5,5/5,6/5,7/5,8/5,9/610192,54121016,530,020,005
A6,1/6,2/6,3/6,4/6,5/6,6/6,7/6,8/6,9/7/7,1/7,2/7,3/7,4/7,5/7,6/7,7/7,8/7,9/8,0122234121219,540,020,005
A8,1/8,2/8,3/8,4/8,5/8,6/8,7/8,8/8,9/9/9,1/9,2/9,3/9,4/9,5/9,6/9,7/9,8/9,9/10152634161221,550,020,005
A10,1/10,2/10,3/10,4/10,5/10,6/10,7/10,8/10,9/11/11,1/11,2/11,3/11,4/11,5/11,6/11,7/11,8/11,9/12183034161223,550,020,005
A12,1/12,2/12,3/12,4/12,5/12,6/12,7/12,8/12,9/13/13,1/13,2/13,3/13,4/13,5/13,6/13,7/13,8/13,9/14/14,1/14,2/14,3/14,4/14,5/14,6/14,7/14,8/14,9/1522355520162850,020,005
A15,5/16/16,5/17/17,5/18264055201630,550,020,005
A18,5/19/19,5/20/20,5/21/21,5/2230475520163460,020,005
A22,5/23/23,5/24/24,5/25/25,5/2635556625203860,040,008
A26,5/27/27,5/28/28,5/29/29,5/30426266252041,560,040,008
A30,5/31/31,5/32/32,5/33/33,5/34/34,5/3548696630204580,040,008
A35,5/36/36,5/37/37,5/38/38,5/39/39,5/40/40,5/41/41,5/4255776630204980,040,008
A42,5/43/43,5/44/44,5/45/45,5/46/46,5/47/47,5/48628587,535205380,040,008

Information about this article

DIN 173 replaceable drill bushes

The DIN 173 drill bushes without mounting slots are primarily used for drilling holes using drilling jigs as they allow quick changes for different drilling diameters.

The DIN 173 drill bushes from norelem are available in Forms A, K and L whereby the latter two Forms have size 30. The replaceable drill bushes are made from low carbon steel, case hardened to 780 ±40 HV 10 and ground, and are available up to Ø 48 mm. If various size increments are required, the diameters increase in size by 0.1 mm up to 15 mm, the larger diameters increase in size in increments of 0.5 mm.

Search
Shopping cart
Number of items: 0
Amount: 0.00 
Display
Speed ordering
United States
Sitemap Print Recommended Newsletter Top
Copyright © 2017 norelem. All rights reserved. Tel. +49 (0) 71 45/206-44 to 45 · Fax +49 (0) 71 45/206-83